Car Battery Accessories
Simply connect the Intelligent 12 volt / 3.3 amps Battery Trickle Charger your cars battery and forget about it!
‘Intelligent’ circuitry means It will automatically maintain a full charge, switching on and off as need be so your battery will always be fully charged when you want to use your car.
No more jump starting your car – which can damage circuitry on more modern cars – or replacing batteries which have gone flat once too often and do not hold a full charge anymore.
Auto Express said “Like all the best ideas, Dis-Car-Nect is simple and very effective” awarded their 5 star highest rating!
‘Dis-Car-Nect’ fits in minutes to ALL battery types. Simply unscrew the black knob and, if the ‘fuse link is fitted, current will be maintained to all electrics – except the starter motor which will blow the fuse if an attempt is made to start the car!
If the ‘fuse link’ is not fitted all power is cut-off preventing battery drain and electrical fires in classic cars and cars in storage.
Your car is at risk – from its own battery. An acid leak causes untold damage from corrosion. The Original Battery Mat® neutralises any acid spills and repels moisture, keeping the area under and around your battery clean, dry and corrosion free.
The Original Battery Mat® is made of super absorbent polypropylene needle punch felt, with one side heat treated to give it additional strength. This fabric is slowly pressure-treated at high temperatures with a unique, all-natural, acid neutralizing formula, and then cured in ovens. Finally, the fabric is dipped in a latex sealant mixture, again in the ovens, and screen printed.
Because of the latex sealant, it repels water and keep the acid neutralizers sealed in and potent. Because the latex sealant is not impervious to battery acid, however, the acid will seep into the BatteryMat’s highly porous fabric, where it will be absorbed and harmlessly neutralized.
The Original Battery Mat® (at 20cm x 30xm is slightly larger than a standard size battery) is inserted underneath the battery, which is then clamped down as usual. It can be cut with scissors to match the shape of the battery or battery tray. It can be installed easily at any time, either under and existing battery or when replacing an old one.